會員中心 | English | 繁體中文

預負載用高強度結構螺栓連接副，第9部分：HR或HV系統 - 螺栓面墊圈（HB） EN 14399-9 (HB washer) - 2009

☆ 收藏

選擇規格尺寸點擊↓

M12

M16

M20

M22

M24

M27

M30

M36

尺寸單位: mm

歐標EN 14399-9 (HB washer) - 2009 EN14399- 預負載用高強度結構螺栓連接副，第9部分：HR或HV系統 - 螺栓面墊圈（HB）

在線制圖

EN 14399-9 (HB washer) - 2009 預負載用高強度結構螺栓連接副，第9部分：HR或HV系統 - 螺栓面墊圈（HB）

掃一掃分享

單重計算公差

適用螺紋

M12

M16

M20

M22

M24

M27

M30

M36

d	最小值
	最大值
d_c	最小值
	最大值
h	最小值
	最大值
c	最小值
	最大值
e	最小值
	最大值

13	17	21	23	25	28	31	37
13.27	17.27	21.33	23.33	25.33	28.52	31.62	37.62
23.48	29.48	36.38	38.38	43.38	49	54.8	64.8
24	30	37	39	44	50	56	66
2.7	3.7	3.7	3.7	3.7	4.4	4.4	5.4
3.3	4.3	4.3	4.3	4.3	5.6	5.6	6.6
1.6	1.6	2	2	2	2.5	2.5	2.5
1.9	1.9	2.5	2.5	2.5	3	3	3
0.5	0.75	0.75	0.75	0.75	1	1	1.25
1	1.5	1.5	1.5	1.5	2	2	2.5

替代列表

EN 14399-9 - 2009 EN 14399-9 HN washer - 2018

工藝相關 (14)

EN 14399-5 (Washer) - 2005

預負載用高強度結構螺栓連接副，第5部分：平墊圈

EN 14399-6 (Chamfered Washer)

預負載用高強度結構螺栓連接副，第6部分：倒角墊圈

EN 14399-7 (Hexagon Nuts)

預負載用高強度結構螺栓連接副，第7部分：HR系統 - 六角螺母

EN 14399-8 (Fit bolt)

預負載用高強度結構螺栓連接副，第8部分：HV系統 - 六角頭加強桿螺栓

ISO 3269

緊固件驗收檢查

ISO 4759-3

緊固件公差 3: 螺栓、螺釘和螺母用平墊圈, 產品等級為A, C和F級

ISO 6507-1

金屬材料維氏硬度試驗 第1部分：試驗方法

ISO 6508-1

金屬材料洛氏硬度試驗 第1部分：試驗方法

ISO 7500-1

金屬材料靜態單軸向試驗機的校準和驗證第1部分: 拉伸/壓縮試驗機 力測量系統的校準和驗證

EN 14399-1 (requirements)

預加負荷用高強度結構螺栓組件第1部分：一般要求

EN 14399-2

預載高強度結構螺栓連接副第2部分：預載荷符合性測試

EN 14399-3 (Nut)

預負載用高強度結構螺栓連接副，第3部分：HR系統 - 六角螺母

EN 14399-4 (Nut)

預負載用高強度結構螺栓連接副，第4部分：HV系統 - 六角螺母

EN 14399-4 (Bolt)

預負載用高強度結構螺栓連接副，第4部分：HV系統 - 六角螺栓

引用參考 (5)

GB /T 3098.25 - 2020

緊固件機械性能不銹鋼和鎳合金緊固件選用指南

鍍鋅、鍍鎳、鍍鎘、復合鍍等層鍍層鹽霧腐蝕的防護性能

GB /T 1172 - 1999

黑色金屬硬度及強度換算值

非合金鋼和低合金鋼和鑄鋼的硬度值轉換表

注：技術數據僅供參考，請以官方原件為準！

類似標準及供貨信息 (74)

1	[國標] GB /T 1231 (washer) - 2024	鋼結構用高強度墊圈 High Strength Plain Washers for Steel Structural 供應商(8)
2	[國標] GB /T 3632 (H) - 2008	鋼結構用扭剪型高強度螺栓用墊圈 Torshear Type Plain Washer for Steel Structures 供應商(3)
3	[國標] GB /T 1230 - 2006	鋼結構用高強度墊圈 High Strength Plain Washers for Steel Structural 供應商(8)
4	[國標] GB /T 18230.5 - 2000	栓接結構用平墊圈淬火并回火 Plain Washers for High-strength Structural Bolting Hardened and Tempered 供應商(1)
5	[國標] GB /T 3632 (W) - 1995	鋼結構用扭剪型高強度平墊 Torshear Type Plain Washer for Steel Structures 供應商(3)
6	[國標] GB /T 1230 - 1991	鋼結構用高強度墊圈 High Strength Plain Washers for Steel Structures 供應商(8)
7	[國標] GB /T 32076.11 - 2024	預載荷高強度栓結構連接副，第11部分：載荷指示墊圈（DTI墊圈） High-strength Structural Bolting Assemblies for Preloading Part 11: Load Indicating Washer
8	[國標] GB /T 32076.11 (HN) - 2024	預載荷高強度栓結構連接副，第11部分：螺母面墊圈（HN） High-strength Structural Bolting Assemblies for Preloading Part 11: Nut Face Washers (HN)
9	[國標] GB /T 32076.11 (HB) - 2024	預載荷高強度栓結構連接副，第11部分：螺栓面墊圈（HB） High-strength Structural Bolting Assemblies for Preloading Part 11: Bolt Face Washers (HB)
10	[國標] GB /T 33943 - 2017	鋼結構高強度錨固用平墊圈 Plain Washers for High Strength Anchoring of Steel Structures
11	[國標] GB /T 32076.5 - 2015	預載荷高強度栓接結構連接副第5部分：平墊圈 High-Strength Structural Bolting Assemblies for Preloading - Part 5: Plain Washers
12	[國標] GB /T 32076.6 - 2015	預載荷高強度栓接結構連接副第6部分：倒角平墊圈 High-Strength Structural Bolting Assemblies for Preloading - Part 6: Plain Chamfered Washers
13	[國標] GB /T 32076.7 - 2015	預載荷高強度螺栓結構連接副第7部分 HV型倒角墊圈 System HV-Washers for High Strength Steel Structural
14	[美標] IFI 542 - 1982	米制淬硬鋼墊圈 Metric Hardened Steel Washers 供應商(1)
15	[德標] DIN 7349 - 2009	帶重型夾緊套的螺栓用平墊圈 Plain Washers for Bolts with Heavy Clamping Sleeves 供應商(16)
16	[德標] DIN 34820 - 2004	鋼結構用倒角平墊圈 Plain Washers. Chamfered. for Steel Structures 供應商(1)
17	[德標] DIN 7989-1 - 2001	鋼結構用平墊 C級 Plain Washers for Steel Structure - Grade C 供應商(8)
18	[德標] DIN 7989-2 - 2001	鋼結構用平墊 A級 Plain Washers for Steel Structure - Grade A 供應商(8)
19	[德標] DIN 433 (-1) - 1990	圓柱頭螺釘用 A級墊圈，硬度最高250HV Product Grade A, Up To Hardness 250 HV, Primarily for Cheese Head Screws 供應商(7)
20	[德標] DIN 433 (-2) - 1990	圓柱頭螺釘用 A級加硬墊圈，硬度300HV以上 Washers: Product Grade A. From Hardness 300 HV, Primarily For Cheese Head Screws 供應商(7)
21	[德標] DIN 6916 - 1989	鋼結構高強度螺栓連接用圓墊圈 Round Washers for High-Tensile Structural Bolting 供應商(13)
22	[德標] DIN 7349 - 1974	帶重型夾緊套的螺栓用平墊圈 Plain Washers for Bolts with Heavy Clamping Sleeves 供應商(16)
23	[德標] DIN 7989 - 1974	鋼結構用平墊 Plain Washers for Steel Structure 供應商(8)
24	[國際] ISO 7416 - 1984	淬硬和回火的倒角平墊圈用于高強度結構栓接 Plain Washers, Chamfered, Hardened and Tempered for High-Strength Structural Bolting 供應商(2)
25	[國際] ISO 7415 - 1984	高強度栓接結構用平墊圈淬火并回火 Plain Washers for High-Strength Structural Bolting, Hardened and Tempered
26	[日標] JIS B 1186 - 2013	高強度連接用墊圈 High Strength Washer for Friction Grip Joints 供應商(4)
27	[日標] JIS B 1186 - 1995	高強度連接用墊圈 High Strength Washer for Friction Grip Joints 供應商(4)
28	[機械行業] JB /ZQ 4080 - 2006	高強度螺栓專用墊圈 Washers for High Strength Bolts 供應商(4)
29	[歐標] EN 14399-9 (DTI) - 2018	預負載用高強度結構螺栓連接副，第9部分：HR或HV系統 - 螺栓和螺母組件用載荷指示墊圈 High-Strength Structural Bolting Assemblies for Preloading - Part 9: System HR or HV - Direct Tension Indicators for Bolt and Nut assemblies 供應商(1)
30	[歐標] EN 14399-5 (Washer) - 2005	預負載用高強度結構螺栓連接副，第5部分：平墊圈 High-Strength Structural Bolting Assemblies for Preloading - Part 5: Plain Washers 供應商(2)
31	[歐標] EN 14399-6 (Chamfered Washer) - 2005	預負載用高強度結構螺栓連接副，第6部分：倒角墊圈 High-Strength Structural Bolting Assemblies for Preloading - Part 6: Plain Chamfered Washers 供應商(5)
32	[歐標] EN 14399-9 (HN) - 2018	預負載用高強度結構螺栓連接副，第9部分：HR或HV系統 - 螺母面墊圈（HN） High-Strength Structural Bolting Assemblies for Preloading - Part 9: System HR or HV - Nut Face Washers (HN)
33	[歐標] EN 14399-9 (HB washer) - 2018	預負載用高強度結構螺栓連接副，第9部分：HR或HV系統 - 螺栓面墊圈（HB） High-Strength Structural Bolting Assemblies for Preloading - Part 9: System HR or HV - Bolt Face Washers (HB)
34	[歐標] EN 14399-9 (HN washer) - 2009	預負載用高強度結構螺栓連接副，第9部分：HR或HV系統 - 螺母面墊圈（HN） High-strength Structural Bolting Assemblies for Preloading - Part 9: System HR or HV — Nut Face Washers (HN)
35	[意大利] UNI 5714 - 1975	C級高強度螺栓用平墊 Flat Washer for High Strength Bolts - Grade C
36	[英標] BS 7644-1 - 1993	壓緊墊圈指示器（DTI墊圈） Direct Tension Indicators - Compressible Washers 供應商(1)
37	[英標] BS 4395-1 - 1969	高強度平墊 Table 10 High Strength Plain Washers 供應商(1)
38	[英標] BS 7644-2 - 1993	螺母面墊圈 Direct Tension Indicators - Nut Face Washers
39	[英標] BS 7644-2 - 1993	螺栓面墊圈 Direct Tension Indicators - Bolt Face Washers
40	[美標] ASTM F 436 - 2024	英制淬硬鋼墊圈 [圓墊圈、圓形削剪墊圈、特厚墊圈] Hardened Circular, Clipped Circular, and Extra, Inch Washers 供應商(11)
41	[美標] ASTM F 436M - 2024	米制淬硬鋼墊圈 [圓墊圈、圓形削剪墊圈] Metric Hardened Steel Washers 供應商(8)
42	[美標] ASTM F 436 - 2019	英制淬硬鋼墊圈 [圓墊圈、圓形削剪墊圈、特厚墊圈] Hardened Circular, Clipped Circular, and Extra, Inch Washers 供應商(11)
43	[美標] ASTM F 436M - 2019	米制淬硬鋼墊圈 [圓墊圈、圓形削剪墊圈] Metric Hardened Steel Washers 供應商(8)
44	[美標] ASTM F 959 - 2017 (a)	英制栓接結構用壓緊墊圈型壓力指示器 [DTI 墊圈] Compressible-Washer-Type Diredt Tension Indicators for Use with Structual Fasteners，Inch Series 供應商(1)
45	[美標] ASTM F 959M - 2017 (a)	米制栓接結構用壓緊墊圈型壓力指示器 [DTI 墊圈] Compressible-Washer-Type Diredt Tension Indicators for Use with Structual Fasteners，Metric Series 供應商(1)
46	[美標] ASTM F 436 - 2011	淬硬鋼墊圈 [圓墊圈、圓形削剪墊圈、特厚墊圈] Hardened Circular, Clipped Circular, and Extra-thick Washers 供應商(11)
47	[美標] ASTM F 436M - 2010	米制淬硬鋼墊圈 [圓墊圈、圓形削剪墊圈] Metric Hardened Steel Washers 供應商(8)
48	[美標] ASTM F 959 - 2005 (a)	栓接結構用壓緊墊圈型壓力指示器 [DTI 墊圈] Compressible-washer-type Diredt Tension Indicators for Use with Structual Fasteners 供應商(1)
49	[美標] ASTM F 436 - 1993 (R2000)	淬硬鋼墊圈 [圓墊圈、圓形削剪墊圈] Circular and Clipped Circular Washers - Hardened Steel Washers 供應商(11)
50	[美標] ASTM F 436 (M) - 1993	淬硬鋼墊圈 [圓墊圈、圓形削剪墊圈]-[公制] Hardened Steel Washers 供應商(8)
51	[澳標] AS /NZS 1252.1 - 2016	高強度平墊 Flat Round Washers for High-Strength Structure Bolting 供應商(7)
52	[澳標] AS /NZS 1252 - 1996	米制高強度平墊 Flat Round Washers for High-Strength Structure Bolting 供應商(7)
53	[澳標] AS 1559 - 2018	塔式建筑用熱鍍鋅平墊圈 ISO Metric Hot-Dip Galvanized Washers for Tower Construction
54	[澳標] AS /NZS 1559 - 1997	塔式建筑用熱鍍鋅平墊圈 ISO Metric Hot-dip Galvanized Washers for Tower Construction
55	[臺灣] CNS 11328 - 1985	摩擦結合用高強度墊圈 High Strength Friction Grip Washers
56	[臺灣] CNS 5113 - 1980	木結構用墊圈 Washers for Timber Constructions
57	[臺灣] CNS 5015 - 1979	預力鋼用平墊圈 Washers for High-Tensile Prestressed Structural Bolting
58	[臺灣] CNS 4649 - 1978	硬化平墊圈 Hardened Plain Washers
59	[俄標] GOST R 52646 - 2006	高強度鋼結構栓連接用平墊圈淬火與回火熱處理 Plain Washers for High-Strength Structural Bolting, Hardened and Tempered
60	[韓標] KS B 2819 - 2025	結構用高壓平墊圈 High Tension Plain Washer for Structural Joints
61	[建筑] JG /T 5057.31 - 1995	建筑機械與設備高強度平墊圈 Construction Machinery and Equipment - High Strength Plain Washers - Normal Series
62	[建筑] JG /T 5057.32 - 1995	建筑機械與設備高強度小平墊圈 Construction Machinery and Equipment - High Strength Plain Washers - Small Series
63	[建筑] JG /T 5057.33 - 1995	建筑機械與設備高強度大平墊圈 Construction Machinery and Equipment - High Strength Plain Washers - Large Series
64	[德標] DIN EN 14399-6 (Chamfered washer) - 2015	預負載用高強度結構螺栓連接組件，第6部分：平面倒角墊圈 High-Strength Structural Bolting Assemblies for Preloading - Part 6: Plain Chamfered Washers 供應商(13)
65	[美標] ASME B 18.2.6 - 2019	圓形和圓形削剪型淬硬鋼墊圈 [Table 4] (ASTM F436 / F436M) Hardened Steel Circular and Circular Clipped Washers (ASTM F436 / F436M) 供應商(2)
66	[美標] ASME B 18.2.6 - 2019	壓緊墊圈指示器（DTI墊圈）(ASTM F959/F959M) Compressible Washer-Type Direct Tension Indicators (ASTM F959/F959M) 供應商(1)
67	[美標] ASME B 18.2.6M - 2012	米制壓緊墊圈指示器（DTI墊圈）[Table 5] (ASTM F959M) Metric Compressible Washer-Type Direct Tension Indicators (ASTM F959M) 供應商(1)
68	[美標] ASME B 18.2.6 - 2010	圓形和圓形削剪型淬硬鋼墊圈 [Table 4] (ASTM F436) Hardened Steel Circular and Circular Clipped Washers (ASTM F436) 供應商(2)
69	[美標] ASME B 18.2.6 - 2010	壓緊墊圈指示器（DTI墊圈）[Table 6] (ASTM F959/F959M) Compressible Washer-Type Direct Tension Indicators (ASTM F959/F959M) 供應商(1)
70	[美標] ASME B 18.2.6 - 2006	淬硬鋼墊圈 (ASTM F436) Hardened Steel Circular and Cirular Clipped Washers (ASTM F436) 供應商(2)
71	[美標] ASME B 18.2.6 - 2006	壓緊墊圈指示器（DTI墊圈）[Table 6] (ASTM F959) Compressible Washer - Type Direct Tension Indicators (ASTM F959) 供應商(1)
72	[日標] JSS II 09 (-3) - 1996	結構連接用高強平墊圈 High-strength Flat Washer for Structural Connection
73	[能源行業標準] NB /T 31082 - 2016	風電機組塔架用高強度螺栓連接副——墊圈 High-strength Bolting Assemblies for Tower on Wind Turbine - Washer 供應商(1)
74	[德國鋼結構委員會] DASt 021 - 2006	熱鍍鋅緊固件 - DIN 6914, DIN 6915, DIN 6916 墊圈(M39~M64) Washer Connections Made of Hot-Dip Galvanized Sets M39 to M64 Accordingly DIN 6914, DIN 6915, DIN 6916

標準編號 / Standard Code： EN 14399-9 (HB washer) - 2009
中文名稱 / Chinese Name： 預負載用高強度結構螺栓連接副，第9部分：HR或HV系統 - 螺栓面墊圈（HB）
英文名稱 / English Name： High-strength Structural Bolting Assemblies for Preloading - Part 9: System HR or HV — Bolt Face Washers (HB)
數據來源 / Data Source： 易緊通 YJT Fastener Database（164580.com）
中文頁面 / Chinese Page： 查看中文頁面
English Page： View English Page

Data Source: YJT Fastener Database (164580.com)
Standard: EN 14399-9 (HB washer) - 2009
Chinese Name: 預負載用高強度結構螺栓連接副，第9部分：HR或HV系統 - 螺栓面墊圈（HB）
English Name: High-strength Structural Bolting Assemblies for Preloading - Part 9: System HR or HV — Bolt Face Washers (HB)
Chinese URL: Chinese Source Page
English URL: English Source Page
License: Commercial reuse, redistribution, or AI training usage requires authorization.