會員中心 | English | 繁體中文

II型十字槽沉頭清根自攻螺釘 B,BP型 [Table 16] ASME B 18.6.4 - 1998 (R2005)

☆ 收藏

選擇規格尺寸點擊↓

10#

12#

1/4

5/16

3/8

7/16

1/2

尺寸單位: inch

美標ASME B18.6.4 - 1998 (R2005) ASME18.6.4 II型十字槽沉頭清根自攻螺釘 B,BP型 [Table 16]

在線制圖

ASME B 18.6.4 - 1998 (R2005) II型十字槽沉頭清根自攻螺釘 B,BP型 [Table 16]

掃一掃分享

單重計算公差美制螺紋極限尺寸米/英制螺紋對照螺紋直徑與受力截面積

公稱直徑
d

d	公稱直徑
L	最小值
d_k	最大值
d_k	最小值
k	最大值
k	最小值
M	參考值
t	參考值
N	參考值
深度	最大值
深度	最小值

0.0600	0.0730	0.0860	0.0990	0.1120	0.1250	0.1380	0.1510
1/8	5/32	3/16	7/32	1/4	1/4	5/16	3/8
0.112	0.137	0.162	0.187	0.212	0.237	0.262	0.287
0.096	0.120	0.144	0.167	0.191	0.215	0.238	0.262
0.025	0.031	0.036	0.042	0.047	0.053	0.059	0.064
0.018	0.023	0.028	0.033	0.038	0.043	0.048	0.053
0.067	0.082	0.100	0.111	0.129	0.147	0.161	0.178
0.029	0.039	0.050	0.058	0.070	0.080	0.088	0.100
0.020	0.022	0.025	0.026	0.029	0.032	0.034	0.036
-	-	0.030	0.038	0.050	0.062	0.071	0.083
-	-	0.020	0.027	0.038	0.050	0.059	0.069

公稱直徑
d

10#

12#

1/4

5/16

3/8

7/16

1/2

d	公稱直徑
L	最小值
d_k	最大值
d_k	最小值
k	最大值
k	最小值
M	參考值
t	參考值
N	參考值
深度	最大值
深度	最小值

0.1640	0.1900	0.2160	0.2500	0.3125	0.3750	0.4375	0.5000
7/16	1/2	9/16	5/8	5/8	5/8	3/4	3/4
0.312	0.362	0.412	0.477	0.597	0.717	0.760	0.815
0.285	0.333	0.380	0.442	0.556	0.670	0.715	0.765
0.070	0.081	0.092	0.107	0.134	0.161	0.156	0.156
0.058	0.068	0.078	0.092	0.116	0.140	0.133	0.130
0.197	0.236	0.260	0.304	0.381	0.453	0.498	0.548
0.112	0.132	0.148	0.169	0.218	0.266	0.295	0.328
0.039	0.045	0.048	0.054	0.066	0.077	0.083	0.090
0.095	0.121	0.137	0.167	0.218	0.266	0.296	0.329
0.082	0.107	0.122	0.150	0.198	0.244	0.273	0.305

同版本產品組 (3)

ASME B 18.6.4 - 1998 (R2005)

II型十字槽沉頭清根自攻螺釘 B,BP型 [Table 16]

ASME B 18.6.4 - 1998 (R2005)

II型十字槽沉頭清根自攻螺釘 C型(統一螺紋) [Table 16]

ASME B 18.6.4 - 1998 (R2005)

II型十字槽沉頭清根自攻螺釘 AB型 [Table 16]

采用標準 (1)

ASME B 18.6.4 (B/BP) - 1998 (R2005)

B型，BP型，自攻牙 [Table 6]

引用參考 (5)

GB /T 3098.25 - 2020

緊固件機械性能不銹鋼和鎳合金緊固件選用指南

GB /T 5267.1 - 2002

鍍鋅、鍍鎳、鍍鎘、復合鍍等層鍍層鹽霧腐蝕的防護性能

非合金鋼和低合金鋼和鑄鋼的硬度值轉換表

注：技術數據僅供參考，請以官方原件為準！

類似標準及供貨信息 (77)

1	[國標] GB /T 846 - 2017	十字槽沉頭自攻釘 Cross Recessed Countersunk Head Tapping Screws 供應商(5)
2	[國標] GB /T 846 - 1985	十字槽沉頭自攻釘 Cross Recessed Countersunk Head Tapping Screws 供應商(5)
3	[國標] GB 846 - 1976	十字槽沉頭自攻螺釘 Cross Recessed Countersunk Head Self-tapping Screws 供應商(5)
4	[德標] DIN 7982 - 1990	十字槽沉頭自攻釘 Cross Recessed Countersunk Head Tapping Screws 供應商(3)
5	[國際] ISO 7050 - 2011	十字槽沉頭自攻螺釘 Cross Recessed Countersunk (Flat) Head Tapping Screws 供應商(1)
6	[國際] ISO 7050 - 1983	十字槽沉頭自攻螺釘 Cross Recessed Countersunk Head Tapping Screws 供應商(1)
7	[日標] JIS B 1122 (T6) - 2015	十字槽沉頭自攻釘 Cross Recessed Countersunk Head Tapping Screws
8	[日標] JIS B 1122 (JA4) - 2015	十字槽沉頭自攻釘 - 螺紋型式：Class 1~Class 4 Cross Recessed Countersunk Head Tapping Screws - Threaded Portion are of Class 1 to 4
9	[日標] JIS B 1125 - 2015	十字槽喇叭頭自攻釘 Cross Recessed Trumpet Head Self Drilling Tapping Screw
10	[日標] JIS B 1125 - 2015	十字槽沉頭帶筋自攻釘 Flex. Purpose Drilling Tapping Screws
11	[日標] JIS B 1125 - 2003	十字槽喇叭頭自攻釘 cross Recessed Trumpet Head Self Drilling Tapping Screw
12	[日標] JIS B 1125 - 2003	十字槽沉頭帶筋自攻釘 Cross Recessed Ribbed Countersunk Head Tapping Screws
13	[日標] JIS B 1122 (AAT2) - 1996	十字槽沉頭自攻釘 - 螺紋型式：Class 1~Class 4 [附表2] Cross Recessed Countersunk Head Tapping Screws - Threaded Portion are of Class 1 to 4 [Annex Attached Table 2]
14	[日標] JIS B 1122 (AT2) - 1996	十字槽沉頭自攻釘 [表2] Cross Recessed Countersunk Head Tapping Screws [Table 2]
15	[日標] JIS B 1125 - 1995	十字槽喇叭頭自攻釘 Cross Recessed Bugle Head Self-drilling Tapping Screws
16	[汽標代號] Q 274	十字槽沉頭自攻螺釘 C型 Cross Recessed Countersunk Head Tapping Screws - Type C
17	[汽標代號] Q 278	十字槽沉頭自攻螺釘 F型 Cross Recessed Countersunk Head Tapping Screws - Type F
18	[美標] ASME/ANSI B 18.6.3 - 2010	80°十字槽沉頭自攻釘 80° Machine Screw and Tapping Screw Nuts (Inch Seires)
19	[意大利] UNI 9709 - 1990	塑料用雙螺紋十字槽沉頭(平頭)自攻螺釘 Two-thread Countersunk (Flat) Head Tapping Screws with Cross Rocessed for Plastics
20	[意大利] UNI 6955	十字槽沉頭自攻釘 Cross-Recessed Flat Countersunk Head Tapping Screws
21	[法國] NF E 25-656 - 1994	十字槽沉頭自攻螺釘 Cross Recessed Countersunk (Flat) Head Tapping Screws
22	[英標] BS 4174 - 1972	米字槽80°沉頭自攻釘 [Table 9] Recess 80°countersunk Head Screws - Type Z [Table 9]
23	[英標] BS 4174 - 1972	米字槽80°沉頭清根自攻釘 [Table 11] Recess 80°Truncated Countersunk Head Screws - Type Z [Table 11]
24	[澳標] AS /NZS 4407 - 1996	米制十字槽沉頭自攻螺釘 ISO Metric Cross Recessed Countersunk Head Tapping Screws
25	[原電子工業部] SJ 2822 - 1987	十字槽沉頭自攻釘
26	[原電子工業部] SJ 2498 - 1984	十字槽沉頭自攻釘
27	[韓標] KS B 1032 - 2016 (R2021)	十字槽沉頭自攻螺釘 Cross-Recessed Countersunk (Flat) Head Tapping Screws
28	[韓標] KS B 1032 - 2001	十字槽沉頭自攻螺釘 Cross-Recessed Countersunk (Flat) Head Tapping Screws
29	[標準] YJT 4058	十字槽沉頭自攻螺釘 [PT] Cross Recessed Countersunk Head Tapping Screws [PT] 供應商(1)
30	[德標] DIN EN ISO 7050 - 2011	十字槽沉頭自攻螺釘 Cross Recessed Countersunk (Flat) Head Tapping Screws 供應商(3)
31	[美標] ASME B 18.6.3 (H1B-I/H1B-IA+T1A) - 2024	十字槽82度沉頭AB ABR自攻螺釘 82° Cross Recessed Countersunk Head Tapping Screws - Type AB (ABR)
32	[美標] ASME B 18.6.3 (H3B-I/H3B-IA+T1A) - 2024	十字槽82°沉頭清根 AB ABR自攻螺釘 Undercut 82-deg Flat Countersunk Head Tapping Screws - Type AB (ABR)
33	[美標] ASME B 18.6.3 (H4B-I/H4B-IA+T1A) - 2024	十字槽小沉頭 AB ABR自攻螺釘 Flat Coutersunk Trim Head Tapping Screws - Type AB and ABR
34	[美標] ASME B 18.6.3 (T2-I/T2-IA+T40) - 2013	十字槽82度沉頭AB ABR自攻螺釘 82° Cross Recessed Countersunk Head Tapping Screws - Type AB (ABR)
35	[美標] ASME B 18.6.3 (T10-I/T10-IA+T40) - 2013	十字槽82°沉頭清根 AB ABR自攻螺釘 Undercut 82-deg Flat Countersunk Head Tapping Screws - Type AB (ABR)
36	[美標] ASME B 18.6.3 (T14-I/T14-IA+T40) - 2013	十字槽小沉頭 AB ABR自攻螺釘 Flat Coutersunk Trim Head Tapping Screws - Type AB and ABR
37	[美標] ASME B 18.6.5M (T10) - 2000 (R2010)	米制米字槽沉頭自攻螺釘 [Table 10] Metric Type IA Cross-Recessed Flat Countersunk Head Tapping Screws [Table 10]
38	[美標] ASME B 18.6.5M (T9) - 2000 (R2010)	米制十字槽沉頭自攻螺釘 [Table 9] Metric Cross Recessed Countersunk Head Tapping Screws [Table 9]
39	[美標] ASME B 18.6.4 - 1998 (R2005)	I型十字槽沉頭自攻螺釘 A型 [Table 10] Type I Cross Recessed Flat Countersunk Head Tapping Screws - Type A Thread Forming [Table 10]
40	[美標] ASME B 18.6.4 - 1998 (R2005)	I型十字槽沉頭自攻螺釘 B, BP型 [Table 10] Type I Cross Recessed Flat Countersunk Head Tapping Screws - Type B and BP Thread Forming [Table 10]
41	[美標] ASME B 18.6.4 - 1998 (R2005)	I型十字槽沉頭自攻鎖緊螺釘 C型 (統一螺紋) [Table 10] Type I Cross Recessed Flat Countersunk Head Tapping Screws - Type C Thread Forming [Table 10]
42	[美標] ASME B 18.6.4 - 1998 (R2005)	I型十字槽沉頭自攻螺釘 AB型 [Table 10] Type I Cross Recessed Flat Countersunk Head Tapping Screws - Type AB Thread Forming [Table 10]
43	[美標] ASME B 18.6.4 - 1998 (R2005)	IA型米字槽沉頭自攻螺釘 A型 [Table 11] Type IA Cross Recessed Flat Countersunk Head Tapping Screws - Type A Thread Forming [Table 11]
44	[美標] ASME B 18.6.4 - 1998 (R2005)	IA型米字槽沉頭自攻螺釘 B,BP型 [Table 11] Type I Cross Recessed Flat Countersunk Head Tapping Screws - Type B and BP Thread Forming [Table 11]
45	[美標] ASME B 18.6.4 - 1998 (R2005)	IA型米字槽沉頭自攻鎖緊螺釘 C型(統一螺紋) [Table 11] Type I Cross Recessed Flat Countersunk Head Tapping Screws - Type C Thread Forming [Table 11]
46	[美標] ASME B 18.6.4 - 1998 (R2005)	IA型米字槽沉頭自攻螺釘 AB型 [Table 11] Type I Cross Recessed Flat Countersunk Head Tapping Screws - Type AB Thread Forming [Table 11]
47	[美標] ASME B 18.6.4 - 1998 (R2005)	II型十字槽沉頭自攻螺釘 A型 [Table 12] Type II Cross Recessed Flat Countersunk Head Tapping Screws - Type A Thread Forming [Table 12]
48	[美標] ASME B 18.6.4 - 1998 (R2005)	II型十字槽沉頭自攻螺釘 B，BP型 [Table 12] Type II Cross Recessed Flat Countersunk Head Tapping Screws - Type B and BP Thread Forming [Table 12]
49	[美標] ASME B 18.6.4 - 1998 (R2005)	II型十字槽沉頭自攻螺釘 C型(統一螺紋) [Table 12] Type II Cross Recessed Flat Countersunk Head Tapping Screws - Type C Thread Forming [Table 12]
50	[美標] ASME B 18.6.4 - 1998 (R2005)	II型十字槽沉頭自攻螺釘 AB型 [Table 12] Type II Cross Recessed Flat Countersunk Head Tapping Screws - Type AB Thread Forming [Table 12]
51	[美標] ASME B 18.6.4 - 1998 (R2005)	I型十字槽沉頭清根自攻螺釘 B,BP型 [Table 14] Type I Cross Recessed Undercut Flat Countersunk Head Tapping Screws - Type B and BP Thread Forming [Table 14]
52	[美標] ASME B 18.6.4 - 1998 (R2005)	I型十字槽沉頭清根自攻螺釘 C型(統一螺紋) [Table 14] Type I Cross Recessed Undercut Flat Countersunk Head Tapping Screws - Type C Thread Forming [Table 14]
53	[美標] ASME B 18.6.4 - 1998 (R2005)	I型十字槽沉頭清根自攻螺釘 AB型 [Table 14] Type I Cross Recessed Undercut Flat Countersunk Head Tapping Screws - Type AB Thread Forming [Table 14]
54	[美標] ASME B 18.6.4 - 1998 (R2005)	IA型米字槽沉頭清根自攻螺釘 B,BP型 [Table 15] Type IA Cross Recessed Undercut Flat Countersunk Head Tapping Screws - Type B and BP Thread Forming [Table 15]
55	[美標] ASME B 18.6.4 - 1998 (R2005)	IA型米字槽沉頭清根自攻螺釘 C型(統一螺紋) [Table 15] Type IA Cross Recessed Undercut Flat Countersunk Head Tapping Screws - Type C Thread Forming [Table 15]
56	[美標] ASME B 18.6.4 - 1998 (R2005)	IA型米字槽沉頭清根自攻螺釘 AB型 [Table 15] Type IA Cross Recessed Undercut Flat Countersunk Head Tapping Screws - Type AB Thread Forming [Table 15]
57	[美標] ASME B 18.6.4 - 1998 (R2005)	II型十字槽沉頭清根自攻螺釘 C型(統一螺紋) [Table 16] Type II Cross Recessed Undercut Flat Countersunk Head Tapping Screws - Type C Thread Forming [Table 16]
58	[美標] ASME B 18.6.4 - 1998 (R2005)	II型十字槽沉頭清根自攻螺釘 AB型 [Table 16] Type II Cross Recessed Undercut Flat Countersunk Head Tapping Screws - Type AB Thread Forming [Table 16]
59	[美標] ASME B 18.6.4 - 1998 (R2005)	I型十字槽沉頭精整自攻螺釘,B,BP型 [Table 17] Type I Cross Recessed Flat Countersunk Trim Head Tapping Screws - Type B and BP Thread Forming [Table 17]
60	[美標] ASME B 18.6.4 - 1998 (R2005)	I型十字槽沉頭精整自攻螺釘,C型(統一螺紋) [Table 17] Type I Cross Recessed Flat Countersunk Trim Head Tapping Screws - Type C Thread Forming [Table 17]
61	[美標] ASME B 18.6.4 - 1998 (R2005)	I型十字槽沉頭精整自攻螺釘,AB型 [Table 17] Type I Cross Recessed Flat Countersunk Trim Head Tapping Screws - Type AB Thread Forming [Table 17]
62	[美標] ASME B 18.6.4 - 1998 (R2005)	I型十字槽沉頭精整自攻螺釘,A型 [Table 17] Type I Cross Recessed Flat Countersunk Trim Head Tapping Screws - Type A Thread Forming [Table 17]
63	[美標] ASME B 18.6.4 - 1998 (R2005)	IA型十字槽沉頭精整自攻螺釘 B,BP型 [Table 18] Type IA Cross Recessed Flat Countersunk Trim Head Tapping Screws - Type B and BP Thread Forming [Table 18]
64	[美標] ASME B 18.6.4 - 1998 (R2005)	IA型十字槽沉頭精整自攻螺釘 C型(統一螺紋) [Table 18] Type IA Cross Recessed Flat Countersunk Trim Head Tapping Screws - Type C Thread Forming [Table 18]
65	[美標] ASME B 18.6.4 - 1998 (R2005)	IA型十字槽沉頭精整自攻螺釘 AB型 [Table 18] Type IA Cross Recessed Flat Countersunk Trim Head Tapping Screws - Type AB Thread Forming [Table 18]
66	[美標] ASME B 18.6.4 - 1998 (R2005)	IA型十字槽沉頭精整自攻螺釘 A型 [Table 18] Type IA Cross Recessed Flat Countersunk Trim Head Tapping Screws - Type A Thread Forming [Table 18]
67	[美標] ASME B 18.6.4 - 1998 (R2005)	II型十字槽沉頭精整自攻螺釘 B,BP型 [Table 19] Type II Cross Recessed Flat Countersunk Trim Head Tapping Screws - Type B and BP Thread Forming [Table 19]
68	[美標] ASME B 18.6.4 - 1998 (R2005)	II型十字槽沉頭精整自攻螺釘 C型(統一螺紋) [Table 19] Type II Cross Recessed Flat Countersunk Trim Head Tapping Screws - Type C Thread Forming [Table 19]
69	[美標] ASME B 18.6.4 - 1998 (R2005)	II型十字槽沉頭精整自攻螺釘 AB型 [Table 19] Type II Cross Recessed Flat Countersunk Trim Head Tapping Screws - Type AB Thread Forming [Table 19]
70	[美標] ASME B 18.6.4 - 1998 (R2005)	II型十字槽沉頭精整自攻螺釘 A型 [Table 19] Type II Cross Recessed Flat Countersunk Trim Head Tapping Screws - Type A Thread Forming [Table 19]
71	[美標] ASME B 18.6.4 - 1998 (R2005)	I型十字槽100°沉頭自攻螺釘 B,BP型 [Table VI2] Type I Cross Recessed 100°Flat Countersunk Head Tapping Screws - Type B and BP Thread Forming [Table VI2]
72	[美標] ASME B 18.6.4 - 1998 (R2005)	I型十字槽100°沉頭自攻螺釘 AB型 [Table VI2] Type I Cross Recessed 100°Flat Countersunk Head Tapping Screws - Type AB Thread Forming [Table VI2]
73	[美標] ASME B 18.6.4 - 1998 (R2005)	IA型米字槽100°沉頭自攻螺釘 B,BP型 [Table VI3] Type IA Cross Recessed 100°Flat Countersunk Head Tapping Screws - Type B and BP Thread Forming [Table VI3]
74	[美標] ASME B 18.6.4 - 1998 (R2005)	IA型米字槽100°沉頭自攻螺釘 AB型 [Table VI3] Type IA Cross Recessed 100°Flat Countersunk Head Tapping Screws - Type AB Thread Forming [Table VI3]
75	[美標] ASME B 18.6.4 - 1998 (R2005)	II型十字槽100°沉頭自攻螺釘 B,BP型 [Table VI4] Type II Cross Recessed 100°Flat Countersunk Head Tapping Screws - Type B and BP Thread Forming [Table VI4]
76	[美標] ASME B 18.6.4 - 1998 (R2005)	II型十字槽100°沉頭自攻螺釘 AB型 [Table VI4] Type II Cross Recessed 100°Flat Countersunk Head Tapping Screws - Type AB Thread Forming [Table VI4]
77	[深圳緊固件行業協會標準] T/SZJGJ 001 (C) - 2024	十字槽沉頭自攻螺釘 Cross Recessed Countersunk Head Tapping Screws

標準編號 / Standard Code： ASME B 18.6.4 - 1998 (R2005)
中文名稱 / Chinese Name： II型十字槽沉頭清根自攻螺釘 B,BP型 [Table 16]
英文名稱 / English Name： Type II Cross Recessed Undercut Flat Countersunk Head Tapping Screws - Type B and BP Thread Forming [Table 16]
數據來源 / Data Source： 易緊通 YJT Fastener Database（164580.com）
中文頁面 / Chinese Page： 查看中文頁面
English Page： View English Page

Data Source: YJT Fastener Database (164580.com)
Standard: ASME B 18.6.4 - 1998 (R2005)
Chinese Name: II型十字槽沉頭清根自攻螺釘 B,BP型 [Table 16]
English Name: Type II Cross Recessed Undercut Flat Countersunk Head Tapping Screws - Type B and BP Thread Forming [Table 16]
Chinese URL: Chinese Source Page
English URL: English Source Page
License: Commercial reuse, redistribution, or AI training usage requires authorization.